TM 5-3895-373-34
D.
REPLACE - Continued.
7.
REPLACE CONVEYOR CHAIN GUARDS.
a.
Place flat washers (17) onto hex head cap
screws (16).
Thread locking compound can cause eye
damage. Wear safety goggles/glasses when
using.
Avoid
contact
with
eyes.
If
compound contacts eyes, flush eyes with
water and get immediate medical attention.
b.
Apply thread locking compound to threads
of hex head cap screws (16).
c.
Install inner conveyor chain guard (18) with
flat washers (17) and hex head cap screws
(16).
d.
Tighten hex head cap screws (16) to 37 lb-ft
(50 N•m).
e.
Place flat washers (20) onto hex head cap
screws (19).
f.
Apply thread locking compound to threads
of hex head cap screws (19).
g.
Install outer conveyor chain guard (21) with
flat washers (20) and hex head cap screws
(19).
h.
Tighten hex head cap screws (19) to 37 lb-ft
(50 N•m).
8.
REPLACE CONVEYOR DRAG PLATE GUARD.
a.
Position conveyor drag plate guard (15) in
hopper and align mounting holes.
b.
Place flat washers (14) on hex head cap
screws (13).
c.
Apply thread locking compound to threads
of hex head cap screws (13).
d.
Install conveyor drag plate guard (15) with
flat washers (14) and hex head cap screws
(13).
e.
Tighten hex head cap screws to 37 lb-ft (50
N•m).
f.
Place flat washer (12) onto hex head cap
screw (11).
g.
Apply thread locking compound to threads
of hex head cap screw (11).
h.
Install flat washer (12) and hex head cap
screw (11).
i.
Tighten hex head cap screw (11) to 90 Ib-ft
(122 N•m).
GO TO NEXT PAGE
2-849
