TM 5-3895-373-34
C.
INSTALL - Continued.
5.
INSTALL MOUNTING BRACKET AND CATCH
PLATE.
a.
Install lockwashers (5) and flat washers (6) onto
hex head cap screws (4).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
b.
Apply thread locking compound
(Item
14,
Appendix B) to threads of hex head cap screws
(4).
c.
Position mounting bracket (7) onto extension
screed frame and secure with flat washers (6),
lockwashers (5), and hex head cap screws (4).
d.
Tighten hex head cap screws (4) to 9 lb-ft (12
N.m).
e.
Apply thread locking compound
(Item
13,
Appendix B) to threads of hex head cap screw
(1).
f.
Secure catch plate (3) on mounting bracket (7)
with hex head cap screw (1) and self-locking hex
nut (2).
g.
Tighten self-locking hex nut (2) only enough so
that catch plate (3) will still move. Do not
overtighten.
GO TO NEXT PAGE
2-811
