TM 5-3895-373-34
2.58
REPLACE/REPAIR EXTENSION SCREED HEIGHT ADJUSTMENT - Continued
C.
INSTALL - Continued.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound contacts
eyes, flush eyes with water and get
immediate medical attention.
l.
Apply thread locking compound
(Item
14,
Appendix B) to threads of set screw (8).
m.
Slide inner height adjustment knob (16) away
from outer height adjustment knob (17). Pins
(25) should be clear of outer height adjustment
knob.
n.
Position stop ring (9) near base of inner height
adjustment knob (16) while knob is still separate
from outer height adjustment knob (17).
o.
Secure stop ring (9) with set screw (8).
p.
Align two pins of inner height adjustment knob
(16) with alignment holes of outer height
adjustment knob (17) and push knobs together.
q.
Insert quick release pin (11) through hole in shaft
(10).
GO TO NEXT PAGE
2-810
