10. INSTALL TOW POINT MOUNT PLATE

9. INSTALL TUBES AND HOSES ONTO LEFT AUGER/CONVEYOR SPEED CONTROL VALVE

e. Apply hydraulic fitting sealant to exposed threads of elbows

TM-5-3895-373-34 Paving Machine Bituminous Material Crawler Mounted Diesel Engine Driven Manual
Page Navigation
804

TM 5-3895-373-34 2.55 REPLACE VALVE PANEL CONTROL VALVES AND FLOW DIVIDERS - Continued. C. INSTALL Continued. 10. INSTALL TOW POINT MOUNT PLATE. a. Position tow point mount plate (71) onto the valve panel over mounting holes. b. Install flat washers (70) onto bolts (69). Thread locking compound can cause eye damage. Wear safety goggles/glasses when using. Avoid contact with eyes. If compound contacts eyes, flush eyes with water and get immediate medical attention. c. Apply thread locking compound to threads of bolts (69). NOTE Connect hydraulic tubes loosely prior to tightening bolts, to ensure alignment of hydraulic tubes. d. Install bolts (69) through tow point mount plate (71) and into valve panel. Tighten bolts to 37 lb- ft (50 N.m). GO TO NEXT PAGE 2-782

Privacy Statement
Press Release
Contact