TM 5-3895-373-34
C.
INSTALL Continued.
8.
INSTALL
ENGINE
OIL
COOLER,
FILTER
DIFFERENTIAL PRESSURE TRANSMIT’-I’ER,
AND ATTACHED HOSES.
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Install lockwasher (15) and flat washer (16) onto
hex head cap screw (14). Apply thread locking
compound to threads of cap screws.
b.
Position engine oil cooler (17) on hydraulic
reservoir (30).
c.
Secure engine oil cooler with hex head cap
screws (14). Tighten hex head cap screws to 37
lb-ft (50 N.m).
d.
Install flat washer (13) onto bolt (12). Apply
thread locking compound to threads of bolts.
e.
Position filter differential pressure transmitter
(18) on hydraulic reservoir (30).
f.
Secure filter differential pressure transmitter (18)
with bolts (12). Tighten bolts to 228 lb-in. (25,8
N.m). Access bolts through rear top right access
door.
GO TO NEXT PAGE
2-717
