TM 5-3895-373-34
C.
INSTALL - Continued.
11.
INSTALL BULKHEAD PARTITION.
a.
Install lockwashers (2) and flat washers (3) onto
hex head cap screws (1).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
b.
Apply thread locking compound to threads of hex
head cap screws (1).
c.
Position bulkhead partition (4) on hydraulic
reservoir (33).
d.
Install hex head cap screws (1). Tighten hex
head cap screws to 9 Ib-ft (12 N.m).
NOTE
FOLLOW-ON-TASKS:
Install fuel tank per paragraph 2.22.
Install engine per paragraph 2.16.
Service hydraulic oil reservoir per LO 5-3895-373-12.
Close rear top right access door per TM 5-3895-373-10.
END OF TASK
2-719
