TM 5-3895-373-34
2.53
REPLACE/REPAIR HYDRAULIC RESERVOIR COMPONENTS - Continued.
C.
INSTALL - Continued.
CAUTION
Be careful not to damage preformed
packing when sliding over threads.
Sharp edges of threads can cut or
damage
preformed
packing.
Damaged
preformed
packing
will
cause
leakage
and
affect
performance.
c.
Install preformed packings (59) over ported
screws (57) and against rear of sight liquid
indicator (58).
d.
Position sight liquid indicator on hydraulic
reservoir (30) and hand tighten ported screws
(57).
e.
Securely tighten ported screws (57). Do not
overtighten.
4.
NSTALL
GASKET
AND
HYDRAULIC
RESERVOIR COVER.
a.
Position gasket (51) on hydraulic reservoir (30).
b.
Install hydraulic reservoir cover (50). Position
reservoir
cover
and
gasket
(51)
to
align
mounting holes.
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Install flat washer (49) onto bolt (48). Apply
thread locking compound to threads of bolts.
d.
Install bolts (48) in all holes except where
indicated.
Install
all
bolts
evenly
before
tightening. Evenly tighten bolts to 19 lb-ft (25
N.m).
GO TO NEXT PAGE
2-712
