TM 5-3895-373-34
2.46
REPAIR TOW POINT CONTROL VALVE - Continued.
A.
DISASSEMBLE - Continued.
5.
REMOVE VALVE CAP NUT, ADJUSTMENT
SCREW, SPRING, AND POPPET FROM INLET
MANIFOLD.
a.
Remove valve cap nut (27) and preformed
packing (28) from inlet manifold (13).
Discard preformed packing.
b.
Remove adjustment screw (29), self-locking
hex nut (30), and preformed packing (31)
from inlet manifold (13). Discard preformed
packing and self-locking hex nut.
c.
Remove spring (32) and poppet (33).
d.
Use an allen wrench to remove retainer (34)
and seat (35) from inlet manifold (13).
Use caution when removing seals
and preformed packings. Scratched
or dented seal grooves can cause
bypass
leakage.
Do
not
use
excessive force when removing seals
and preformed packings. Use an o-
ring
tool
to
remove
seals
and
preformed packings.
e.
Use an o-ring tool to remove preformed
packing (36) from inlet manifold (13).
Discard preformed packing.
GO TO NEXT PAGE
2-634
