TM 5-3895-373-34
2.46
REPAIR TOW POINT CONTROL VALVE - Continued.
A.
DISASSEMBLE.
NOTE
Use bench vise, as required, to
support
tow
point
control
valve
during disassembly.
1.
REMOVE
ELBOWS
AND
STRAIGHT
ADAPTERS FROM TOW POINT CONTROL
VALVE.
a.
Loosen elbow nuts (1) and remove elbows
(2) from tow point control valve (3).
b.
Remove
preformed
packings
(4)
from
elbows (2). Discard preformed packings.
c.
Remove straight adapters (5).
d.
Remove
preformed
packings
(6)
from
straight adapters (5). Discard preformed
packings.
2.
REMOVE
THREADED
END
RODS
AND
MOUNTING BRACKETS FROM TOW POINT
CONTROL VALVE.
a.
Remove hex nuts (7) from threaded end
rods (8).
b.
Remove
threaded
end
rods
(8)
and
mounting brackets (9) from tow point
control valve (3).
GO TO NEXT PAGE
2-632
