TM 5-3895-373-34
2.45
REPAIR AUGER/CONVEYOR CONTROL VALVE.
This task covers:
a.
Disassemble
b.
Clean
c.
inspect
d.
Assemble
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-24P
(Item 106, Appendix D)
Bench vise (Item 112, Appendix D)
Equipment Condition:
Combination wrench (Item 116, Appendix D)
Auger/conveyor control valve removed from valve panel per
Crowfoot wrench (Item 127, Appendix D)
paragraph 2.55.
O-ring tool (Item 103, Appendix D)
Torque wrench, 5 to 150 lb-in (Item 129, Appendix D)
Torque wrench, 0 to 175 lb-ft (Item 132, Appendix D)
Materials/Parts:
Cleaning solvent (Item 31, Appendix B)
Culture swabs (Item 33, Appendix B)
Electrical insulating varnish (Item 38, Appendix B)
Emery cloth (Item 5, Appendix B)
Hydraulic fitting sealant (Item 26, Appendix B)
Hydraulic oil (Item 21, Appendix B)
Lint-free cloth (Item 7, Appendix B)
Thread locking compound (Item 13, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Linear direction tube parts kit
Packing retainer
Preformed packings
Relief valve assembly seal kit
Special shim
Self-locking hex nuts
GO TO NEXT PAGE
2-620
