TM 5-3895-373-34
2.38.
REPLACE/REPAIR TRACK TENSIONING RELIEF VALVE AND UNLOADING VALVE - Continued
E.
ASSEMBLE - Continued.
m.
Install valve disk (34) and spring (33).
n.
Install preformed packings (35 and 36).
NOTE
Ensure ports on valve body (31) are
aligned with ports on valve body (32)
when assembled.
o.
Place assembled valve body (31) and valve
body (32) together and ensure ports are
aligned. Secure with socket head cap screws
(30).
Pipe sealant can cause eye damage or
skin irritation. Wash after skin contact.
Wear
safety
goggles/glasses
when
using. Avoid contact with eyes or skin.
If sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention.
p.
Apply pipe sealant to male ends of bushings
(16 and 29), to pipe thread end of straight
adapter (10), and to the single end of tee (4).
q.
Install straight adapter (10) and bushings (16
and 29) into valve body (32).
r.
Install tee (4) into bushing (29). Orient as
shown.
GO TO NEXT PAGE
2-530
