TM 5-3895-373-34
2.17
DIESEL ENGINE REPAIR.
C.
INSPECT - Continued.
g.
Use an outside micrometer (Item 16, Appendix
D) to measure diameter of Surface S of
Number 3 journal on camshaft (122).
h.
Diameter of Number 3 journal on camshaft
must be 1.9645 to 1.9675 in. (49,898 to 49,974
mm).
i.
If Number 3 journal is less than 1.9645 in.
(49,898 mm), replace camshaft (122).
j.
Use an outside micrometer (Item 15, Appendix
D) to measure thickness of Surface T on
camshaft washer (120).
k.
Washer thickness must be 0.216 to 0.218 in.
(5,47 to 5,54 mm).
l.
If washer thickness is less than 0.216 in. (5,47
mm), replace washer (120).
GO TO NEXT PAGE
2-180
