TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
A.
REMOVE Continued.
35.
REMOVE HYDRAULIC CHARGE FILTERS, AIR
CLEANERS AND CHARGE FILTER MOUNTING
BRACKET.
a.
Using a second person to support hydraulic
charge filters (177), air cleaner (183), and
charge filter mounting bracket (178), remove hex
nuts (179), lockwashers (180), flat washers
(181), and socket head cap screws (182).
Discard lockwashers.
b Remove charge filter mounting bracket (178)
hydraulic charge filters (177), air cleaner (183),
and air hose (72) from the paving machine.
NOTE
Ensure all electrical wires, wire
harnesses, hydraulic oil hoses, fuel
lines, coolant hoses, and engine oil
hoses are clear of engine and pump
assembly. Any components that
interfere
with
engine
and
pump
assembly removal must be tagged
and relocated.
36.
MOVE ALLDISCONNECTED ELECTRICAL WIRES
AND WIRE HARNESSES, HYDRAULIC OIL
HOSES, FUEL LINES, COOLANT LINES, AND
ENGINE OIL HOSES OUT OF THE WAY. THEY
MUST BE MOVED CLEAR OF THE ENGINE SO
THAT THEY WILL NOT INTERFERE WITH THE
ENGINE AND PUMP ASSEMBLY AS IT IS
REMOVED FROM THE MACHINE. DISPOSE OF
ALL
CONTAMINATED
MACHINERY
WIPING
TOWELS IN ACCORDANCE WITH LOCAL
PROCEDURES.
GO TO NEXT PAGE
2-102
