TM 5-3895-373-34
A.
REMOVE Continued.
26.
DISCONNECT
THROTTLE
CONTROL
CABLE
FROM FUEL INJECTION PUMP.
a.
Remove cotter pin (99) and clevis pin (100) at
throttle lever (101). Discard cotter pin. Save
clevis pin for reassembly at installation.
b.
Separate throttle control cable (102) from throttle
lever (101).
c.
Remove hex nut (103), lockwasher (104),
washer (105), and throttle cable bracket (106)
from mounting stud (107) on the left side of the
engine. Save bracket and mounting hardware
for
reassembly
at
installation.
Discard
lockwasher.
GO TO NEXT PAGE
2-93
