TM 5-3895-373-34
2.72
REPAIR SCREED EXTENSION CYLINDER.
This task covers:
a.
Disassemble
b.
Clean
c.
Inspect
d.
Repair
e.
Assemble
INITIAL SETUP
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers. Second person
(Item 106, Appendix D)
required to hold opposite end of piston rod while removing
Bench vise (Item 112, Appendix D)
piston retaining nut or tightening hex nut while assembling.
Cleaning brush (Item 12, Appendix D)
Hydraulic press frame (Item 41, Appendix D)
References:
0-ring tool (Item 103, Appendix D)
TM 5-3895-373-20
Plastic hammer (Item 49, Appendix D)
TM 5-3895-373-24P
Socket wrench adapter (Item 6, Appendix D)
Spanner wrench (Item 128, Appendix D)
Equipment Condition:
Torque wrench (Item 133, Appendix D)
Screed extension cylinder removed per TM 5-3895-373-20.
Universal puller kit (Item 69, Appendix D)
Vise jaw caps (Item 23, Appendix D)
Materials/Parts:
Cleaning cloth (Item 6, Appendix B)
Cleaning solvent (Item 31, Appendix B)
Crocus cloth (Item 4, Appendix B)
Hydraulic oil (Item 21, Appendix B)
Lint-free cloth (Item 7, Appendix B)
Seal kit
Self-locking hex nut
GO TO NEXT PAGE
2-1034
