TM 5-3895-373-20
D.
ASSEMBLE Continued.
h.
Install lockwashers (74) onto socket head cap
screws (75).
Sealing compound can cause eye
damage. Wear safety goggles/glasses
when using. Avoid contact with eyes.
If compound contacts eyes, flush
eyes with water and get immediate
medical attention.
i.
Apply sealing compound to threads of socket
head cap screws (75).
j.
Install and tighten hex nuts (73).
k.
Install adapter (67) onto pipe nipple (65). Tighten
adapter.
1.
Install nozzle (68) into adapter (67). Tighten
nozzle.
m.
Slide pipe nipple (65) through combustion head
(76), holder (79), and mounting bracket (78).
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes, flush
eyes with water and get immediate
medical attention.
n.
Apply pipe sealant to exposed threads of pipe
nipple (65).
o.
Install pipe nipple (65) into elbow (66). Tighten
pipe nipple.
p.
Place retainer (71) onto holder stud (60).
q.
Seat adapter (67) against holder (79).
NOTE
Ensure adapter (67) seats against
holder (79) before tightening set
screw (64). This will allow for proper
burn adjustment.
r.
Apply sealing compound to threads of set screw
(64) and install into mounting bracket (78).
Tighten set screw.
GO TO NEXT PAGE
14-39
