TM 5-3895-373-20
14.5.
REPLACE BURNER CHAMBER AND FUEL SPRAY NOZZLE - Continued.
C. CLEAN Continued.
2.
CLEAN
CAP
SCREWS,
BOLTS,
AND
MOUNTING HARDWARE.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Use thread locking compound solvent to clean
mounting hardware and threads of cap screws
and bolts.
b.
Dry with a cleaning cloth.
D.
ASSEMBLE.
1.
ASSEMBLE NOZZLE ASSEMBLY.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes, flush
eyes with water and get immediate
medical attention.
a.
Apply pipe sealant to both threaded ends of pipe
nipple (69).
b.
Install elbow (70) onto pipe nipple (69). Tighten
elbow.
c.
Place pipe nipple (69) through retainer (71).
d. Install elbow (66) onto pipe nipple (69). Tighten
so that open end of elbow is pointing in the
opposite direction of elbow (70).
e.
Place socket head cap screws (75) through
combustion head (76).
f.
Place spring pins (77) onto socket head cap
screws (75).
g.
Place holder (79) and mounting bracket (78)
onto socket head cap screws (75).
GO TO NEXT PAGE
14-38