TM 5-3895-373-20
C.
CLEAN.
1.
CLEAN BURNER CHAMBER COMPONENT
PARTS.
Carbon
removing
compound
is
TOXIC and caustic. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using. Failure to do so may result in
injury or death to personnel.
If personnel become dizzy when
using carbon removing compound,
immediately get fresh air and medical
help. If compound contacts skin or
clothes, flush with plentiful amounts
of water. If compound contacts eyes,
flush eyes with plentiful amounts of
water for at least 15 minutes and get
immediate medical attention.
a.
Soak
burner
chamber
parts
with
carbon
removing compound.
b.
Use a parts cleaning brush and a cleaning cloth
to remove any hard deposits and carbon buildup.
Use caution when scraping gasket
sealing surfaces with putty knife.
Putty
knife
may
score
sealing
surfaces and debris may fall into
open ports. Failure to do so may
result in poor seal and component
damage.
c.
Use a putty knife, if necessary, to remove any
gasket material from sealing surfaces. Do not
score the sealing surface.
GO TO NEXT PAGE
14-37
