TM 5-3895-373-20
B.
REPAIR - Continued.
2.
CLEAN
VIBRATION
RELIEF
VALVE
AND
COMPONENT PARTS.
Thread locking compound solvent can cause eye
damage. Wear safety goggles/glasses when using.
Avoid contact with eyes. If solvent contacts eyes, flush
eyes with water and get immediate medical attention.
a.
Use a culture swab soaked in thread locking
compound solvent to clean thread locking
compound residue from vibration relief valve
body.
Cleaning solvent, P-D-680, is TOXIC and flammable.
Wear protective goggles and gloves. Use only in a well
ventilated area. Avoid contact with skin, eyes, and
clothes, and do not breathe vapors. Keep away from
heat or flame. Never smoke when using solvent; the
flashpoint for Type III cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury or death to
personnel.
If personnel become dizzy while using cleaning solvent,
immediately get fresh air and medical help. If solvent
contacts skin or clothes, flush with cold water. If solvent
contacts eyes, flush eyes with water and get immediate
medical attention.
b. Rinse valve body and components with cleaning
solvent.
c. Use a culture swab to wipe out valve body inner
bores.
d. Clean threads of all hydraulic fittings by wiping
with a cleaning cloth.
GO TO NEXT PAGE
13-21
