TM 5-3895-373-20
B.
REPAIR Continued.
c.
Replace valve body (17) if threads are stripped
or if foreign material cannot be removed.
d.
Inspect relief spring (14) for distortion. Replace
spring if distortion is detected.
e.
Inspect check ball (15) and valve seat (16) for
nicks, dents, or excessive wear. Replace check
ball and valve seat if damaged.
f.
Inspect adjusting screw (11) for stripped threads.
Replace screw if threads are damaged.
4.
ASSEMBLE VIBRATION RELIEF VALVE.
a.
Ensure that valve body (17) is completely dry
and free of all contaminants.
Thread locking compound can cause eye damage.
Wear safety goggles/glasses when using. Avoid contact
with eyes. If compound contacts eyes, flush eyes with
water and get immediate medical attention.
b.
Apply a thin coating of thread locking compound
to valve seat (16).
Ensure that thread locking compound
does not plug the port opening on the
valve body. Relief valve failure and
hydraulic system failure could result.
c.
Install valve seat (16) into valve body (17) and
allow to dry for a minimum of 5 hours. Ensure
that thread locking compound does not plug the
port opening.
d.
Install check ball (15) and relief spring (14).
e.
Install
adjusting
screw
(11)
and
set
to
measurement (A).
GO TO NEXT PAGE
13-23
