13.4. REPLACE/REPAIR VIBRATION RELIEF VALVE

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
928

TM 5-3895-373-20 13.4. REPLACE/REPAIR VIBRATION RELIEF VALVE - Continued. B. REPAIR Continued. f. Install flat washer (13) and hex nut (12). Ensure that adjusting screw (11) does not move when tightening the hex nut. g. Install flat washer (10) and cap nut (9). h. Wipe threads of straight adapters (4 and 5) and elbow (3) with a cleaning cloth to remove any pipe sealant residue. Pipe fitting sealant can cause eye damage or skin irritation. Wash after skin contact. Wear safety goggles/glasses when using. Avoid contact with eyes or skin. If sealant contacts eyes, flush eyes with water and get immediate medical attention. i. Apply pipe fitting sealant to pipe threaded end of straight adapter (4), pipe threads of elbow (3), and male end of straight adapter (5). j. Install straight adapters (4 and 5) and elbow (3). Align the elbow so the open end points at a 45° angle from straight adapter (4). Refer to illustration. GO TO NEXT PAGE 13-24

Privacy Statement
Press Release
Contact