TM 5-3895-373-20
13.3.
REPLACE SCREED LIFT CYLINDER - Continued.
B.
INSTALL Continued.
2.
INSTALL SCREED LIFT CYLINDER.
a.
Extend screed lift cylinder (3) as needed to fit
into paving machine.
b.
Line up hole in cylinder rod end and lower
screed lifting bracket hole that was used for
mounting of old cylinder as noted during
disassembly. Install clevis pin (6).
c.
Install flat washer (5) and lock pin (4).
d.
Line up hole in screed lift cylinder base with hole
in upper screed lifting bracket. Install clevis pin
(8) and lock pin (7).
GO TO NEXT PAGE
13-16