10.2. REPLACE/REPAIR VEHICULAR BUMPER COMPONENTS

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
836

TM 5-3895-373-20 10.2. REPLACE/REPAIR VEHICULAR BUMPER COMPONENTS. This task covers: a. Remove b. Clean c. Inspect d. Repair e. Install INITIAL SETUP Tools: General mechanic’s automotive tool kit Personnel Required: (Item 54, Appendix E) Two 62B construction equipment rep, Bench vise (Item 55, Appendix E) assist with hoisting vehicular bumper Crowbar, 2 ea (Item 11, Appendix E) Sling strap, 2 ea (Item 49, Appendix E) References: Torque wrench (Item 68, Appendix E) LO 5-3895-373-12 Universal puller kit (Item 31, Appendix E) TM 5-3895-373-24P Wire scratch brush (Item 6, Appendix E) Materials/Parts: Anti-seize compound (Item 9, Appendix C) Cleaning cloth (Item 7, Appendix C) Cleaning solvent (Item 24, Appendix C) Crocus cloth (Item 6, Appendix C) Grease (Item 15, Appendix C) Thread locking compound (Item 12, Appendix C) Thread locking compound solvent (Item 25, Appendix C) Lockwashers Lubrication fittings Push roller Self-locking hex nut Spherical bearings Straight headed pin GO TO NEXT PAGE 10-2

Privacy Statement
Press Release
Contact