TM 5-3895-373-20
9.3. REPLACE TRACK PAD.
This task covers:
a.
Remove
b.
Replace
INITIAL SETUP:
Tools:
References:
General mechanics automotive tool kit
TM 5-3895-373-10
(Item 54, Appendix E)
TM 5-3895-373-24P
Socket wrench adapter (Item 2, Appendix E)
Torque wrench (Item 67, Appendix E)
Equipment Condition:
Hopper wings fully raised per TM 5-
Material/Parts:
Thread locking compound (Item 12, Appendix C)
Shoulder bolts
Square plain nuts
Track pad
A.
REMOVE.
1.
DRIVE PAVING MACHINE UNTIL DAMAGED
TRACK PAD (1) IS AT UPPER FRONT
QUADRANT
OF
TRACK
IDLER
ROLLER.
REFER TO TM 5-3895-373-10.
2.
REMOVE AND DISCARD SHOULDER BOLTS
(2), SQUARE PLAIN NUTS (3), AND TRACK
PAD (1).
B.
REPLACE.
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
APPLY THREAD LOCKING COMPOUND TO
THREADS OF SHOULDER BOLTS (2).
2.
INSTALL TRACK PAD (1), SHOULDER BOLTS
(2), AND SQUARE NUTS (3). TIGHTEN
SHOULDR BOLTS TO 86 LB-FT (117 NOm).
END OF TASK
9-8