13. INSTALL CONDUIT MOUNTING FLANGE, HARNESS SUPPORT ANGLE, AND HARNESS CLAMP, AND CONNECT ELECTRICAL CONNECTORS

12. INSTALL GUIDE SHAFT INTO OPERATOR CONTROL CONSOLE, AND SECURE ONTO CONSOLE SUPPORTS WITH CLAMP CAPS

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
694

TM 5-3895-373-20 7.6. REPAIR/REPLACE OPERATOR CONTROL CONSOLE ASSEMBLY- Continued. C. INSTALL - Continued. 13. INSTALL CONDUIT MOUNTING FLANGE, HARNESS SUPPORT ANGLE, AND HARNESS CLAMP, AND CONNECT ELECTRICAL CONNECTORS. a. Install conduit (26) assembly onto front plate, feeding electrical connectors inside front plate. b. Install conduit mounting flange (25) and harness support angle (24). c. Install self-locking screws (22) through conduit mounting flange (25) and harness support angle (24). Secure with self-locking hex nuts (23). d. Install harness clamp (21), hex head cap screw (20), and self-locking nut (19). GO TO NEXT PAGE 7-52

Privacy Statement
Press Release
Contact