TM 5-3895-373-207.7.REPAIR GAUGE PANEL ASSEMBLY- Continued.A.REMOVE.1.REMOVE RING TERMINALS ANDELECTRICAL CONTACTS AND DISCONNECTELECTRICAL CONNECTORS FROM GAUGEPANEL COMPONENTS.CAUTIONEnsure wires and electricalconnectors are tagged forreassembly. Paving machinefunctions will be affected by incorrectwiring installation.a.Tag all wires and electrical connectors forreassembly.b.Use a jeweler’s screwdriver set to removeterminal screws (1) and lockwashers (2)from switches. Discard lockwashers.c.Remove ring terminals (3) from switches.d.Remove harness connectors (4) fromindicator lights.e.Remove terminal plugs (5) from gauges.f.Disconnect electrical connectors (6 and 7)from control handle electrical connectors.g.Remove harness lug terminals (8) fromignition switch.h.Use a jeweler’s screwdriver set to removeterminal screws (9) and lockwashers (10)from throttle control switch. Discardlockwashers.i.Remove ring terminals (11) from throttlecontrol switch.j.Use a jeweler’s screwdriver set to removescrews (12) and lockwashers (13) from hightemperature manual override button.Discard lockwashers.k.Remove ring terminals (14) from hightemperature manual override button.GO TO NEXT PAGE7-56
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
