TM 5-3895-373-20
C.
INSTALL - Continued.
10.
INSTALL HOSE CLAMPS ONTO CONDUIT,
INSTALL
CONDUIT
ONTO
OPERATOR
CONTROL
CONSOLE,
AND
INSTALL
CONDUIT MOUNTING FLANGE.
a.
Install hose clamps (42) onto conduit (44).
Do not tighten.
CAUTION
Do not use excessive force when
installing wiring harnesses through
conduit.
Damage
to
electrical
connectors and wires may result from
excessive force on wiring harnesses.
Pull wiring harnesses and electrical
connectors one at a time carefully
through conduit.
b.
Carefully feed operator control console wire
harnesses through conduit (44) one at a
time. Use caution not to allow electrical
connectors to bind and become damaged
inside conduit. Bunch conduit up at open
end and pull electrical connectors through.
c.
Install conduit (44) onto operator control
console (8) and secure by tightening hose
clamp (42).
d.
Feed harness connectors through conduit
mounting flange (43) and install conduit
mounting flange onto conduit (44). Tighten
hose clamp (42).
GO TO NEXT PAGE
7-49
