7. INSTALL RELAY AND CIRCUIT BREAKER ASSEMBLY AND ASSEMBLED RELAY MOUNTING BRACKET INTO OPERATOR CONTROL CONSOLE

8. INSTALL PANEL SEAL AND SWITCH PANEL ASSEMBLY ONTO OPERATOR CONTROL CONSOLE

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
685

TM 5-3895-373-20 C. INSTALL - Continued. 7. INSTALL RELAY AND CIRCUIT BREAKER ASSEMBLY AND ASSEMBLED RELAY MOUNTING BRACKET INTO OPERATOR CONTROL CONSOLE. NOTE Ensure wires are routed through conduit mounting flange as tagged. a. Place relay and circuit breaker assembly (81) and assembled relay mounting bracket (80) into operator control console (8). b. Install button head cap screws (79) through operator control console and into assembled relay mounting bracket (80). Tighten to 9 lb-ft (12 N•m). c. Install button head cap screws (76) through bottom of operator control console (8) and into relay and circuit breaker assembly (81). d. Install flat washers (78) and hex nuts (77) onto button head cap screws (76). Tighten hex nuts to 9 lb-ft (12 N•m). GO TO NEXT PAGE 7-43

Privacy Statement
Press Release
Contact