C. INSTALL - TM-5-3895-373-20

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
680

TM 5-3895-373-20 7.6. REPAIR/REPLACE OPERATOR CONTROL CONSOLE ASSEMBLY - Continued. B. CLEAN - Continued. WARNING Thread locking compound solvent can cause eye damage. Wear safety goggles/ glasses when using. Avoid contact with eyes. If solvent contacts eyes, flush eyes with water and get immediate medical attention. 4. CLEAN HEX HEAD CAP SCREWS COATED WITH THREAD LOCKING COMPOUND WITH THREAD LOCKING COMPOUND SOLVENT. 5. WIPE HEX HEAD CAP SCREWS DRY WITH A CLEAN, LINT-FREE CLOTH. C. INSTALL. 1. INSTALL SLEEVE BUSHINGS INTO OPERATOR CONTROL CONSOLE. a. Place sleeve bushing (118) onto bushing press tool (125). b. Position sleeve bushing (118) in shaft housing (126) on console frame (110). c. Tap on bushing press tool (125) with a hammer to install sleeve bushing (118) into shaft housing (126) until fully seated. d. Repeat procedure for second sleeve bushing on other side of console frame (110). 2. INSTALL CONSOLE SUPPORT ANGLES ONTO OPERATOR CONTROL CONSOLE. a. Install console support angles (117 and 116) onto console frame (110) and secure with button head cap screws (114) and hex nuts (115). b. Tighten hex nuts (115) to 9 lb-ft (12 N.m). GO TO NEXT PAGE 7-38

Privacy Statement
Press Release
Contact