TM 5-3895-373-20
C. INSTALL.
1.
INSTALL TURBOSUPERCHARGER.
a.
Remove lint-free cloths from openings of
intake manifold (44) and exhaust manifold
(45).
b.
Remove screws (48), lockwashers (49),
flat washers (50), and bracket (35).
Discard lockwashers.
c.
Install hose flange (42) and gasket (43)
onto turbosupercharger (34) and secure
with machine screws (41).
d.
Install turbosupercharger return hose (36)
and top hose clamp (37) onto hose flange
(42). Tighten hose clamp.
e.
Install flat washers (33) and bolts (32) onto
bracket (35).
f.
Install bracket (35) onto exhaust connector
(46) and tighten bolts (32) hand tight.
g.
Use a hammer to tap sleeve (47) and
exhaust
connector
(46)
onto
turbosupercharger
(34).
Align
exhaust
connector so wide part of flange is
positioned at a 900 angle to exhaust inlet
on turbosupercharger.
h.
Install gasket (40) over turbosupercharger
mounting
studs
(51).
Install
turbosupercharger (34) and secure with
flat washers (39) and nuts (38). Tighten
nuts hand tight.
i.
Install screws (48), lockwashers (49), and
flat washers (50) through bracket (35) into
engine. Tighten hand tight.
j.
Place bottom hose clamp (37) over
turbosupercharger
return
hose
(36).
Reconnect turbosupercharger return hose
to return inlet (52) on engine block.
Tighten hose clamp.
k.
After aligning and installing all hardware,
securely tighten all bolts (32), cap screws
(48), and nuts (38).
GO TO NEXT PAGE
4-25
