TM 5-3895-373-20
A. REMOVE.
1.
REMOVE
TURBOSUPERCHARGER
INLET
HOSE
AND
TURBOSUPERCHARGER
OUTLET ELBOW.
a.
Disconnect
turbosupercharger
inlet
reducer (1) by loosening clamp (2).
b.
Disconnect transmitter harness connector
(3).
c.
Remove pressure transmitter (4) from
turbosupercharger intake elbow manifold
(5).
d.
Unplug lead wire contact (6) from cold
start induction heater (7). Unscrew tube
coupling nut (8) on fuel pipe (9).
e.
Remove bolts (10) and flat washers (11).
f.
Loosen hose clamp (12).
g.
Remove turbosupercharger intake elbow
manifold (5) and disconnect fuel pipe (9)
from cold start induction heater (7). Do
not
remove
inlet
hose
(13)
from
turbosupercharger intake elbow manifold
unless damaged.
h.
Remove gasket (14).
i.
Remove and discard compression sleeve
(15).
GO TO NEXT PAGE
4-21