TM 5-3895-373-20
B.
REPAIR.
1.
DISASSEMBLE
FEED
LIMIT
SWITCH
ASSEMBLY.
a.
Remove fillister head screws (19) and separate
receptacle connector body (20) from front body
(21).
b.
Remove machine screws (22) and separate
head (23) from receptacle connector body (20).
c.
Unscrew connector cap (24) from connector
body (25).
d.
Slide plastic washer (26) and rubber grommet
(27) from connector body (25).
e.
Unscrew connector body (25) from front body
(21).
f.
Tag coil cord (28) wire with the terminal position
at each terminal screw (29).
g.
Loosen terminal screws (29) and pull coil cord
(28) wires from front body (21) terminals.
h.
Slide connector body (25), rubber grommet (27),
plastic washer (26), and connector cap (24) off
of coil cord (28). If any one piece of the
connector is damaged, replace the entire
connector.
GO TO NEXT PAGE
15-119
