TM 5-3895-373-20
B.
INSTALL - Continued.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact
with
eyes.
If
solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
f.
Clean socket head cap screws (3) and hex head
cap screw (2) with thread locking compound
solvent. Dry with a lint-free cloth.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
g.
Apply thread locking compound to threads of
socket head cap screws (3).
h.
Install tow arm support plate (4) and socket
head cap screws (3). Using socket wrench
adapter and hex head driver socket, tighten cap
screws to 320 lb-ft (434 N•m). Ensure support
plate is installed as marked during disassembly.
i.
Start paving machine per TM 5-3895-373-10.
Place throttle control switch in IDLE position.
j.
Jog left hand tow point movement switch up or
down to line up hole in tow point cylinder clevis
with hole in tow arm. Install tow point locking
pin (1). Shut down paving machine per TM 5-
3895-373-10.
k.
Apply thread locking compound to threads of
hex head cap screw.
l.
Install hex head cap screw (2). Tighten cap
screw to 37 lb-ft (50 N•m).
m. Remove sling strap from tow arm.
END OF TASK
15-101
