TM 5-3895-373-20
15.13.
ADJUST AUGER/CONVEYOR DRIVE CHAINS.
This task covers:
a. Check
b. Adjust
INITIAL SETUP
Tools:
References:
General mechanics automotive tool kit
TM 5-3895-373-12
(Item 54, Appendix E)
TM 5-3895-373-24P
Combination wrench (Item 58, Appendix E)
Crowfoot wrench (Item 65, Appendix E)
Equipment Condition:
Torque wrench (Item 68, Appendix E)
Screed fully lowered per TM 5-3895-373-10.
Materials/Parts:
Cleaning cloth (Item 7, Appendix C)
Thread locking compound (Item 12, Appendix C)
Thread locking compound solvent (Item 25, Appendix C)
NOTE
There is a left hand and a right hand
auger/conveyor drive chain on the paving
machine. This procedure refers to
adjustment of the right hand
auger/conveyor drive chain. Procedure is
identical for left hand auger/conveyor
drive chain. Right hand auger/conveyor
drive chain is shown in this procedure.
A.
CHECK.
1.
REMOVE COVER PLATE.
a.
Remove hex head cap screws (1), flat washers
(2), and square flat washers (3).
b.
Remove cover plate (4).
GO TO NEXT PAGE
15-92