TM 5-3895-373-20
B.
INSTALL - Continued.
2.
CONNECT TUBES AT MAIN SCREED
VIBRATION MOTOR.
Hydraulic fitting sealant can cause eye
damage or skin irritation. Wash after
skin contact. Wear safety goggles/glasses
when using. Avoid contact with eyes or
skin. If sealant contacts eyes, flush eyes
with water and get immediate medical
attention.
a.
Apply hydraulic fitting sealant to hose fitting
threads of elbows (4).
b.
Install and tighten tubes (2 and 3) to elbows
(4).
3.
CONNECT HOSES AT EXTENSION
SCREED VIBRATION MOTOR.
a.
Apply hydraulic fitting sealant to hose fitting
threads of elbows (8).
b.
Install and tighten hoses (6 and 7) to elbows
(8).
NOTE
FOLLOW-ON-TASKS: Install extension screed blower assemblies and flexible pipe per paragraph
14.8.
Install cover plates on extension screeds per paragraph 2.22.
Extension screeds fully retracted per TM
5-3895-373-10.
END OF TASK
15-91