2. REMOVE TOW ARM MOUNTING BRACKET

A. REMOVE - Continued. - TM-5-3895-373-20_1126

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1119

TM 5-3895-373-20 A. REMOVE - Continued. 2. REMOVE TOW ARM MOUNTING BRACKET. NOTE Mark tow arm mounting bracket (9) to indicate top for reassembly. a. Remove socket head cap screws (8). b. Remove tow arm mounting bracket (9) and shim (10). 3. REMOVE ROLLER AND MECHANICAL STOP. a. Secure head of roller (11) with flat head screwdriver bit and socket wrench. b. Remove hex nut (12), washer (13), and roller (11). c. Remove socket head cap screw (14) and mechanical stop (15). Screed tow arm weighs approximately 200 lbs (91 kg). Safely secure tow arm with overhead hoist and sling strap to prevent slipping. Failure to use proper lifting equipment or secure tow arm against slipping could result in severe injury to personnel. d. Lower tow arm (5) all the way to the ground and remove sling strap. GO TO NEXT PAGE 15-97

Privacy Statement
Press Release
Contact