TM 5-3895-373-20
14.8.
REPLACE/REPAIR BLOWER MOTOR - Continued.
C.
CLEAN.
1.
CLEAN BLOWER COMPONENT PARTS.
Cleaning solvent, PD680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
HI cleaning solvent is 200°F (93,30C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Rinse all metal parts (except electric
motor) in cleaning solvent.
b.
Use a parts cleaning brush and cleaning
solvent to remove any hard deposits from
blower fan rotor, body, and motor
mounting plate.
c.
Dry with a clean, lint-free cloth.
d.
Dispose of waste cleaning solvent in
accordance with local procedures.
2.
CLEAN CAP SCREWS.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Use thread locking compound solvent to
clean threads of cap screws.
b.
Dry with a clean, cleaning cloth.
GO TO NEXT PAGE
14-66
