TM 5-3895-373-20
A.
REMOVE - Continued.
2.
REMOVE MAIN SCREED BLOWER
ASSEMBLIES AND FLEXIBLE PIPE.
a.
Disconnect blower electrical connector (4)
from screed harness electrical connector
(5).
b.
Remove hex nuts (6) and clamp (7).
Discard exhaust clamp.
c.
Remove hex head cap screws (8) and flat
washers (9).
d.
Remove motor mounting clamp (10) and
cushions (11).
e.
Lift blower assembly (12) away from the
main screed, disconnecting flexible pipe
(13) from adapter (14).
GO TO NEXT PAGE
14-61