TM 5-3895-373-10
CAUTION
Do
not
operate
engine
at
high
temperature
any
longer
than
necessary. Continued operation at
high
temperature
will
cause
permanent damage to the engine.
Starter
motor
may
overheat
if
operated longer than 30 seconds. If
engine does not start, allow starter to
cool for two or three minutes before
trying again. If engine fails to start
after three attempts, refer problem to
Unit Maintenance.
c.
Turn the ignition switch to the START position
and immediately release when the engine starts.
The switch will spring return to the ON position.
d.
Place throttle control switch in MAX position,
travel switch in F/R position, and speed range
switch in travel (hare) position.
e.
Set screed lift switch to the up, RAISE position.
f.
Slowly move control handles forward and move
paving machine. Choose nearest out-of-the-way
location for paving machine shutdown. Do not
run
overheated
engine
any
longer
than
necessary.
g.
Release
high-temperature
manual
override
button.
h.
Shut down paving machine per paragraph 2.11.
Refer
overheated
engine
problem
to
Unit
Maintenance.
2-112
