Table 2-2. Troubleshooting (Continued).

Table 2-2. Troubleshooting (Continued). - TM-5-3895-371-24P_34

TM-5-3895-371-24P Melter Asphalt Skid Mounted Hot Oil Circulating 750 GPH Chausse Model STMD-3000A Manual
Page Navigation
17

TM 53895371-24 & P Table 2-2. Troubleshooting (Continued). MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 9. SPRAY LACKS PRESSURE (Continued): step 3. Discharge strainer plugged. Remove and clean (para 12-6). 10. APPLICATION RATE VARIES: Step 1. Improper reading of tank contents. Use measuring stick for accurate readings. Tank must be level when reading measuring stick. Step 2. Defective pump tachometer. Repair or replace (para 2-25). step 3. Defective recording bitumeter. Repair or replace (para 2-25). step 4. Catch lever on quadrant not pulled. Pull catch lever out. step 5. Discharge strainer plugged. Remove and clean discharge strainer on pump outlet (para 12-6). Step 6. Hydrostatic control not firmly positioned. Adjust and tighten (TM 5-3895-371-10). step 7. Hydrostatic override control partially engaged. Return override to neutral position. 11. DIFFICULTY IN RAISING SPRAY BAR END SECTIONS IN VERTICAL POSITIONS: step 1. Hinge joint inoperative. Adjust or replace retaining rings and packing (para 2-38). step 2. Damaged linkage Repair or replace linkage (para 2-38). 2-10

Privacy Statement
Press Release
Contact