Table 2-2. Troubleshooting (Continued).

Table 2-2. Troubleshooting (Continued). - TM-5-3895-371-24P_33

Table 2-2. Troubleshooting (Continued). - TM-5-3895-371-24P_35

TM-5-3895-371-24P Melter Asphalt Skid Mounted Hot Oil Circulating 750 GPH Chausse Model STMD-3000A Manual
Page Navigation
18

TM 5-3895-371-24 & P MALFUNCTION Table 2-2. Troubleshooting (Continued). TEST OR INSPECTION CORRECTIVE ACTION 12. ALL NOZZLES DO NOT CUT OFF: Step 1. Linkage out of adjustment or worn. Repair or replace linkage so that all spray bar levers are in appropriate position (para 2-38). 13. SPRAY BAR DOES NOT SHIFT PROPERLY: Step 1. Step 2. Step 3. Step 4. Step 5. Loose connections. Tighten connections. Defective solenoid. Replace solenoid (para 2-20). Defective wiring. Check connections and tighten as needed. Shift lock engaged. Disengage shift lock. Linkage damaged. Repair linkage (para 2-38). 14. SPRAY BAR DOES NOT RAISE & TURN UP PROPERLY: Step 1. Loose connections. Tighten. Step 2. Defective solenoid. Replace solenoid (para 2-20). step 3. Defective wiring. Check connections. 2-11

Privacy Statement
Press Release
Contact