TM 5-3895-371-24 & P(13)Depress bulb (24), turn counterclockwise, and remove.(14)Remove two screws (28), nuts (6), washer (7), base (22) and gasket (21). Cut wire andremove two backup lamps (29).(15)Remove two screws (12) and lens (11).(16)Depress bulb (10) and turn counterclockwise to remove.(17)Remove two screws (131, cut electrical Fire, and remove four clearance lamps (9).(18)Remove two capscrews (37) and lockwashers (36). Cut wire and remove blackoutlamp (14) at both ends of bumper.(19)For repair of blackout lamps (14) see manual TM 9-2320-273-20.(20)Remove four capscrews (52) and two capscrews (55) with two washers (56) and nuts(57) from bracket (51). Remove lamp assembly (50).(21)Remove lens (53). Depress bulb (54) and turn counterclockwise to remove.(22)Remove two screws (45) and lens (46).(23)Depress bulb (47) and turn counterclockwise to remove.(24)Remove two capscrews (49), cut electrical wire, and remove housing (48) (four lamps).(25)Remove twelve screws holding wiring loom and remove left and right harness assemblies(3) and (4). (See fig. 2-3.)(26)Remove four capscrews (41), nuts (1), washers (2), and bumper (5).2-15
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
