TM 5-3895-371-24 & PSection VI. MAINTENANCE OF ELECTRICAL SYSTEM2-9. Loom Bumper and Marker Lamps.NOTEFor ease in installation, check diagramshowing wire color code and terminallocation before removing wires in step(2). (See fig. 2-2.)a. Removal.(1) Remove terminal board cover (40, fig. 2-1) by removing two capscrews (3) and lock-washers (4).(2) Disconnect wires from terminal board (42).(3) Remove two screws (43) and remove terminal board (42).(20).(4) Remove retaining ring (19), lens (18), and gasket (16) from right hand taillamp assembly(5) Depress bulb (17), turn counterclockwise, and remove.(6) Remove two nuts (8) and washers (7) from base (15). Cut electrical wires and removeright hand taillamp assembly (20).(30).(7) Remove retaining ring (19), lens (18), and gasket (16) from left hand taillamp assembly(8) Depress bulb (32), turn counterclockwise, and remove.(9) Remove two nuts (8) and washers (7) from base (33). Cut electrical wires and removeleft hand taillamp assembly (30).(10) Remove license lamp window (31) from base (33).(11) Remove two nuts (38), washers (39), capscrews (34), and bracket (35).(12) Remove two screws (27), lens rim (26), lens (25) and gasket (23).2-14
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
