TM 5-3895-371-24 & P
(19) Install new O-ring (54) on mounting flange (55). Lower housing (24) carefully over
rotating group and on to mounting flange (55) being careful not to disturb the assembled, internal
parts. (Refer to fig. 3-40.) Carefully place block assembly (30, fig. 3-4) onto pistons alining oil cavity
with trunnion (27). Install capscrews (56) and lockwashers (20) and tighten, but do not torque.
Figure 3-40. Positioning Pump Housing.
3-36
