TM 5-3895-385-23-2
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
CONVEYOR DRIVE MOTOR AND CONVEYOR CHAIN REMOVAL, SERVICE, INSTALLATION, AND
ADJUSTMENT
INITIAL SETUP:
Tools and Special Tools
Personnel Required
General Mechanics Tool Kit (GMTK) (WP 0440, Vol
91L
3, Item 64)
Assistant
5/16 Hex key 1/2 inch drive (WP 0440, Vol 3, Item
References
26)
LO 5-3895-385-13
Cap and plug set (WP 0440, Vol 3, Item 11)
TM 5-3895-385-10
Drain pan (WP 0440, Vol 3, Item 15)
Suitable lifting device (200 lb (91 kg) minimum)
Web sling (WP 0440, Vol 3, Item 66)
Materials/Parts
Equipment Conditions
Cotter pin (2) (WP 0439, Vol 3, Item 83)
End gates removed (WP 0225)
Link pins (2) (WP 0439, Vol 3, Item 86)
Floorboard assembly removed (WP 0274)
Lock washer (2) (WP 0439, Vol 3, Item 107)
Engine hood assembly removed (WP 0433)
Lock washer (WP 0439, Vol 3, Item 110)
Estimated Time to Complete Task
Lubricating oil, gear, GO-80/90 (WP 0439, Vol 3,
15 hr
Item 39)
O-ring (WP 0439, Vol 3, Item 77)
Wiping rag (WP 0439, Vol 3, Item 89)
CONVEYOR DRIVE MOTOR AND CONVEYOR CHAIN REMOVAL, SERVICE, INSTALLATION, AND
ADJUSTMENT
NOTE
Conveyor drive motor removal and installation steps are the same for both sides of the
Bituminous Material Paving Machine (BMPM). Right side shown.
If removing right side conveyor drive motor, remove spraydown pump (WP 0279), fuel filter (WP
0336), and coolant reservoir (WP 0366).
