TM 5-3895-385-23-2
0391
Electric Heater Wiring Harness Removal -- Continued.
1. Remove screw (Figure 1, Item 4) and wiring bracket (Figure 1, Item 3) from electric generator (Figure 1, Item
2).
2. Remove three screws (Figure 1, Item 5), and remove electric generator cover (Figure 1, Item 1) from electric
generator (Figure 1, Item 2).
Figure 2. Electric Generator Electrical Connectors.
CAUTION
Tag and label electrical wires prior to removal. Electrical wires must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
3. Remove screw (Figure 2, Item 7) and ground wire (Figure 2, Item 6) from electric generator (Figure 2, Item 2).
4. Remove four nuts (Figure 2, Item 1) and electrical wires (Figure 2, Item 8) from electrical posts (Figure 2, Item
5).
5. Remove nut (Figure 2, Item 4) from electric generator (Figure 2, Item 2).
6. Remove electric heater wiring harness (Figure 2, Item 3) from electric generator.