TM 5-3895-385-23-2
0318
DOUBLE HYDRAULIC PUMP SERVICE
Drain Double Hydraulic Pump
Figure 1. Double Hydraulic Pump Service.
1. Position drain pan below drain plug (Figure 1, Item 3).
2. Remove drain plug (Figure 1, Item 3).
3. Allow gear oil to drain completely.
4. Install drain plug (Figure 1, Item 3).
END OF TASK
Fill Double Hydraulic Pump
1. Remove dip stick (Figure 1, Item 2).
2. Fill double hydraulic pump at dip stick port (Figure 1, Item 1) with gear oil until oil level reaches level on dip
stick (Figure 1, Item 2).
3. Install dip stick (Figure 1, Item 2).
END OF TASK
