TM 5-3895-385-23-2
0288
Right Hopper Wing Rear Hydraulic Hoses Removal -- Continued.
CAUTION
Tag and label hydraulic hoses prior to removal. Hydraulic hoses must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
1. Disconnect hydraulic hose 6B (Figure 1, Item 1) and hydraulic hose 5B (Figure 1, Item 2) from hydraulic
cylinder (Figure 1, Item 9), and cap/plug hydraulic hoses and hydraulic fittings.
2. Disconnect hydraulic hose 6B (Figure 1, Item 1) and hydraulic hose 5B (Figure 1, Item 2) from tee fittings
(Figure 1, Items 3 and 4), and cap/plug hydraulic hoses and hydraulic fittings.
3. Remove three bolts (Figure 1, Item 5), bracket (Figure 1, Item 6), four spacers (Figure 1, Item 7), hydraulic
hose 6B (Figure 1, Item 1) and hydraulic hose 5B (Figure 1, Item 2) from Bituminous Material Paving Machine
(BMPM) (Figure 1, Item 8).
END OF TASK
Right Hopper Wing Forward Hydraulic Hoses Inspection
1. Inspect hydraulic hose 6B (Figure 1, Item 1) and hydraulic hose 5B (Figure 1, Item 2) and fittings for cracks,
holes, wear, or deformities. Replace hydraulic hoses if damaged.
2. Inspect hydraulic fittings on hydraulic cylinder, tee fittings, and hoses for cracks, stripped threading, wear, or
deformities. Replace component if damaged.
END OF TASK
Right Hopper Wing Rear Hydraulic Hoses Installation
1. Install three bolts (Figure 1, Item 5), bracket (Figure 1, Item 6), four spacers (Figure 1, Item 7), hydraulic hose
6B (Figure 1, Item 1) and hydraulic hose 5B (Figure 1, Item 2) onto BMPM (Figure 1, Item 8).
2. Remove caps/plugs from all hydraulic hoses (Figure 1, Items 1 and 2) and hydraulic fittings.
3. Connect hydraulic hose 6B (Figure 1, Item 1) and hydraulic hose 5B (Figure 1, Item 2) onto tee fittings (Figure
1, Items 3 and 4).
4. Connect hydraulic hose 6B (Figure 1, Item 1) and hydraulic hose 5B (Figure 1, Item 2) onto hydraulic cylinder
(Figure 1, Item 9).
END OF TASK
