TM 5-3895-385-23-2
0272
OPERATOR SEAT REMOVAL, INSTALLATION, AND REPAIR
NOTE
Operator seat removal and installation steps are the same for both sides of the Bituminous
Material Paving Machine (BMPM). Right side shown.
Operator Seat Removal
Figure 1. Operator Seat.
1. Remove four nuts (Figure 1, Item 4) and lock washers (Figure 1, Item 3) from operator seat (Figure 1, Item 1).
Discard lock washers.
2. Remove operator seat (Figure 1, Item 1) from slide mount (Figure 1, Item 2).
END OF TASK
Operator Seat Installation
1. Install operator seat (Figure 1, Item 1) into slide mount (Figure 1, Item 2) mounting holes.
2. Install four nuts (Figure 1, Item 4) and new lock washers (Figure 1, Item 3) onto operator seat (Figure 1, Item
1).
END OF TASK
