TM 5-3895-385-23-2
0272
Operator Seat Repair -- Continued.
3. Remove two bolts (Figure 2, Item 4), flat washers (Figure 2, Item 3), nuts (Figure 2, Item 2), and arm rests
(Figure 2, Item 1) from operator seat (Figure 2, Item 5).
4. Remove four nuts (Figure 2, Item 13), eight flat washers (Figure 2, Item 12), and seat slide (Figure 2, Item 9)
from operator seat (Figure 2, Item 5).
5. Install four nuts (Figure 2, Item 13), eight flat washers (Figure 2, Item 12), and seat slide (Figure 2, Item 9)
onto operator seat (Figure 2, Item 5).
6. Install two bolts (Figure 2, Item 4), flat washers (Figure 2, Item 3), nuts (Figure 2, Item 2), and arm rests
(Figure 2, Item 1) onto operator seat (Figure 2, Item 5).
7. Install two bolts (Figure 2, Item 6), new locking nuts (Figure 2, Item 7), and seat belt (Figure 2, Items 8 and
15) onto operator seat (Figure 2, Item 5).
8. Install two bolts (Figure 2, Item 10), new lock washers (Figure 2, Item 11), and operator seat pad (Figure 2,
Item 14) onto operator seat (Figure 2, Item 5).
END OF TASK
FOLLOW-ON TASK
Set BATTERY DISCONNECT switch to ON (TM 5-3895-385-10).
END OF TASK
END OF WORK PACKAGE